Introduction to the operation of the fish scale removal machine

Introduction to the operation of the fish scale removal machine

The emergence of the fish scale remover, using the machine to automatically remove the scales solves many of the troubles and troubles of people. For the operation of the fish scale removal machine, you should pay attention to the following matters:

1. The operator needs to be familiar with the general performance, structure, electrical system, hydraulic system and transmission mechanism of the machine tool. It is strictly prohibited to use it above the performance.

2. Refuel according to the lubrication rules of the machine tool, and lubricate the lubrication parts.

3. Clean the hydraulic oil filter every half month; clean the hydraulic oil tank for half a year, and keep the oil clean.

4. Before the machine is started, it is necessary to carefully check whether the balls and the supporting rollers are running freely. If there is a jam, it is strictly prohibited to roll and it should be repaired in time.

5. After the machine is turned on, use the touch screen manual automatic conversion button to set the machine to manual mode. Check whether the manual functions of the machine are normal. If the Z-phase lamp is not bright, press the quasi-stop button to make the spindle stop and the Z-phase lamp lights up.

6. Set the machine to the automatic mode, place the crankshaft and the tailstock to tighten the workpiece. At this time, the machine's home position light is on. Press the cycle button to process the workpiece automatically. The initial stage of rolling should be able to see a small amount of lubricating oil to lubricate each axis. neck.

7. When the machine tool is working, the door of the electric part should be carefully closed to keep the door sealed intact, and prevent oil, water, iron filings and dust from entering.

8. After the work of removing the scales, clean the iron and dirt, keep the machine clean and rust-proof, and cut off the power.