Introduction to the maintenance of brush machine

Introduction to the maintenance of the brush peeling machine

The use and operation of the root vegetable brush peeling machine:

1. Check if there is any problem with the rotation of the brush roller before use, otherwise add lubricating oil to the bearing to achieve flexibility.

2. Please safely ground the ground wire before use, check the plug line, and do safety precautions.

3. During the use process, the material of the machine can be sprinkled according to the situation, and the amount of water can be grasped by the degree of contamination of the raw materials.

4. Start the motor after filling the material first, and the material should not be overfilled to prevent splashing.

5. After using the brush roller to clean it, stop it, close the water pipe, dry it and use it.

Maintenance and repair of the hair stick machine

1. After each use, clean the machine carefully to ensure cleanliness. Do not use a sharpener to clean the brush roller when cleaning. It is strictly forbidden to directly rinse the brush roller with a water spray pipe when the shield and the guard are removed.

2. When the machine is running for 100 hours, the protective cover and the guard plate should be opened, and the chain should be filled with lubricating grease. It is recommended to use No. 20 oil or calcium base grease.

3. Fill the bearing once a week with lubricating oil and use No. 20 oil.

4. Fill the bearing once a week with lubricating oil and use No. 20 oil. The worm gear reducer is replaced once every six months, and the No. 20 oil is used.

The hair stick machine can work for a long time, and the material skin stuck on the hair stick needs to be carefully cleaned. It can also be combined with the washing machine and the cutting machine to make the production line mechanized!